Hur man väljer en formsprutningsmaskin korrekt

Innan vi väljer specifikationer och modeller förformsprutningsmaskin, we must first check the performance parameter values of the formsprutningsmaskin in the product manual provided by the formsprutningsmaskin manufacturer. And these parameter values represent the main performance characteristics of the formsprutningsmaskin, according to some technical requirements of the plastic products to be produced: such as the type and brand of raw materials used in the product, the quality (weight) of the product, and the size of the product.

Go to find the parameter values in the manual that are close to it. The formsprutningsmaskin model corresponding to these parameter values is the formsprutningsmaskin to be purchased. At the same time, it is necessary to know whether the working accuracy, speed and product accuracy level of the formsprutningsmaskinsom ska köpas uppfyller produktens formningsförhållanden.
In addition, the comparison data in the specifications and models are: the ratio of the quality (or volume) and external dimensions of the injection molded product to the parameter value in the equipment, that is, the ratio between the quality (weight) and the theoretical injection volume (or volume) of the formsprutningsmaskin. The proportional relationship between.
The length (height) of the product and the thickness of the forming mold (thickness of the mold on the movable template) are required to be between the sum of the dimensions and the stroke distance of the movable template of the formsprutningsmaskin. In addition, it should be verified that the structural dimensions of the mold to be installed on the formsprutningsmaskin are consistent with the conditions of the formsprutningsmaskin:

1. Avståndet mellan dragstängerna bör vara större än formens bredd och höjd för att underlätta montering av formen.

2. Storleken på mallen uppfyller storlekskraven för gjutformen när den installeras och fixas.

3. Formens bredd och höjd måste motsvara den mindre formstorlek som rekommenderas avformsprutningsmaskin.