Tre kriterier för att välja hydraulolja för formsprutningsmaskin!

Formsprutningsmaskinär en plastbearbetningsprocess, kommer polymerbearbetning att förbruka mycket energi, och en stor mängd energiförbrukning kommer också att genereras i kylanordningen, luftkomprimering och andra länkar. En så stor energiförbrukning formsprutningsmaskin kommer naturligtvis att kräva hydraulolja. Har producerat mycket höga standarder, så hur man väljer hydraulolja i formsprutningsmaskinen? Det finns tre viktiga standarder för referens!

Ett av kriterierna för att välja hydraulolja förformsprutningsmaskin: välj hydraulolja med lämplig viskositet och temperatur. Viskositetskraven för hydrauloljan vid arbetet  temperature and starting temperature of the formsprutningsmaskin are related to the fluidity of the hydraulic action of the formsprutningsmaskin and the accuracy of the transmission, which directly affects the working efficiency of the formsprutningsmaskin. Therefore, the hydraulic oil selection of the formsprutningsmaskin should consider the viscosity and stability. Whether the performance meets the requirements of the production work, if it does not meet the requirements, it should be replaced in time. At the same time, according to different external environmental temperatures, it is also necessary to appropriately select the appropriate hydraulic oil.

Det andra kriteriet för att välja hydraulolja förformsprutningsmaskin: anti-wear hydraulic oil. Generally, under high-pressure work, it will increase the friction during work. Therefore, anti-wear hydraulic oil is a hard requirement. It can not only reduce friction on formsprutningsmaskins. The damage can also improve work efficiency. At the same time, this hydraulic oil also has anti-rust and anti-oxidation effects. The anti-wear hydraulic oil that is given priority for formsprutningsmaskins is generally No. 46 or No. 68.

Det tredje kriteriet för att välja hydraulolja förformsprutningsmaskin: the shear stability of the hydraulic oil. In the production process, the hydraulic oil will be severely sheared when passing through the micro-holes of the pump and valve. At this time, the performance and effect of the hydraulic oil will be damaged. Therefore, when the hydraulic oil is selected, the resistance to the hydraulic oil is Shearing capacity must have a high-demand selection standard, which has a good protective effect on maintaining the functionality of the formsprutningsmaskin.

There are standards for selecting hydraulic oil, and there must be standards during the use of hydraulic oil. Some hydraulic oils have a reduced efficiency after being used for a period of time, so they must be replaced in time. The blackening of the hydraulic oil or the presence of some impurities in the hydraulic oil is to remind us that there has been a problem with the hydraulic oil. We must pay attention to timely supplement and replacement of the hydraulic oil. This is not only for the maintenance of the formsprutningsmaskin, but also saves time and electricity. , An effective guarantee for work.